BrewPi Fridge conversion: OneWire split to 3 sockets

2 Comments

  1. Peter Fradley on September 16, 2014 at 13:57

    I am a little confused by this, are all three one wire sensors soldered to the same wire heading out of the fridge?

    • Elco on September 16, 2014 at 23:12

      Yes, the white cable has 3 strands: 5V, Data, GND. It connects to 3x 5V, 3x Data, 3x GND.
      The OneWire sensors are identified by address and are all connected in parallel on the same bus.

Leave a Comment